Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Iuka, MS

Opener Circuit Board Replacement in Iuka, MS

Failed logic boards and receivers replaced, often after a power surge. Typical cost $175-$400.

When your door needs opener circuit board replacement, you want it done safely and right the first time. Typical jobs in Iuka, MS cost $175-$400, and you approve the price first. Failed logic boards and receivers replaced, often after a power surge.

Is it time for opener circuit board replacement?

  • The opener is completely dead even though it has power
  • It worked until a storm or power surge
  • Random operation or no response to any control
  • Diagnostic lights showing a board fault

What usually causes it

  • Power surges and lightning
  • Heat and moisture damage
  • Age

What you can check yourself

  • Reset the breaker and try a different outlet.
  • Unplug the opener for a minute, then plug it back in.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

How we handle opener circuit board replacement

  1. Confirm power and rule out sensors and controls
  2. Replace the logic board or receiver
  3. Reprogram remotes
  4. Set the limits and force
  5. Recommend surge protection

On older openers, a new opener can cost about the same as a board and adds current safety and security features.

How much does opener circuit board replacement cost?

$175-$400Typical range, parts & labor
about 1 hourTypical time on site

What moves the price:

  • Drive type: chain, belt, screw or wall-mount
  • Whether the fix is a part or a whole new opener
  • Remotes, keypads and smart accessories
  • Ceiling height and rail extensions

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Serving Iuka, MS and nearby towns

A closed garage in a Mississippi summer gets very hot, which shortens the life of opener circuit boards, capacitors and photo-eye sensors. Storms add power surges, so a surge protector is cheap insurance.

Our opener circuit board replacement service covers Iuka (ZIP code 38852) and nearby towns including Farmington (17 mi), Corinth (20.6 mi), Belmont (20.9 mi) and Booneville (23.9 mi). Call (833) 435-8883 to book a visit in Iuka.

Opener Circuit Board Replacement: frequently asked questions

How much does opener circuit board replacement cost in Iuka, MS?

Opener Circuit Board Replacement typically costs $175-$400 including parts and labor, and usually takes about 1 hour. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do opener circuit board replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is opener circuit board replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Mississippi or Iuka requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my opener?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the opener is near the end of its life, replace it. Most openers last 10 to 15 years. If yours is older than that, lacks photo eyes or rolling-code security, or needs a logic board or motor, a new opener is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Iuka, MS

Garage Door Opener Installation

New chain, belt, screw-drive and wall-mount openers installed and programmed.

Typical $350-$800

Wood Garage Door Repair

Rotted, warped or split wood sections repaired, sealed and rebalanced.

Typical $200-$700

Opener Gear & Sprocket Replacement

Stripped drive gears replaced so the motor moves the door again.

Typical $125-$275

Genie Opener Gear & Sprocket Replacement

Genie is the residential opener brand of the Overhead Door Corporation. Genie openers use Intellicode rolling-code remotes, Genie is one of the few brands still offering screw-drive openers, and newer models connect to the Aladdin Connect app.

Typical $125-$275

Amarr Weather Seal Replacement

Amarr, an ASSA ABLOY Group brand, makes residential lines such as Classica, Heritage, Lucern and Oak Summit, as well as commercial doors.

Typical $100-$300

Richards-Wilcox Torsion Spring Replacement

Torsion springs replaced and wound correctly, with high-cycle upgrades available.

Typical $200-$450

Wayne Dalton Off-Track Garage Door Repair

Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

Typical $175-$450

Martin Door Garage Door Installation

New steel, insulated, wood-look and carriage-style doors, measured and professionally installed.

Typical $1,200-$4,500

Allstar Opener Gear & Sprocket Replacement

Allstar openers are no longer made. Replacement remotes and many parts are still available, and we'll tell you when replacing the opener makes more sense.

Typical $125-$275

Craftsman Garage Door Opener Installation

Older Craftsman openers with model numbers starting with 139 were built by Chamberlain, so their remotes and parts often match Chamberlain and LiftMaster models from the same era.

Typical $350-$800

Moore-O-Matic Garage Door Opener Repair

Moore-O-Matic openers are no longer made. We can often keep one running with available parts, or recommend a modern replacement.

Typical $125-$350

Clopay Torsion Spring Replacement

Clopay is one of the largest residential garage door makers in North America, with lines such as Classic, Modern Steel, Coachman and Canyon Ridge. The model is usually printed on a label on the door's end stile, which helps us match replacement panels.

Typical $200-$450

Garage door stuck, noisy or broken?

Talk to a garage door technician in Iuka, MS now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote